Your Pathfinder unit can model the three terms on paper. Make one sample from separate strips, one from joined strips and one with strips going in two directions. Then ask another person to name what changed.

What is on at the Vienna museum?

Advertisementpreview

The Saturday tour on November 21 is listed from 12:30 to 1:30 p.m., in German, for ages 7 to 12. The following day has a separate textile design workshop listed for ages 12 and over. Check the two event entries before visiting. The exhibition covers how clothing is made and used, along with the history and the materials’ paths after people stop wearing them. Vienna Museum of Science and Technology, Tec/xtil exhibition and museum program

From separate fibres to one yarn

Cut three thin strips of paper. Leave one alone to stand for a fibre. Hold the other two together and twist them gently to make a long piece. Compare that with two strips that are only lying together. The model shows how twisting can bind separate material into something you can handle as one strand. Textile factories can use different processes and tools, and some yarns are made from continuous filaments. Your paper strand represents one way to move from separate parts to a longer structure.

Read alsoV&A Make-it: Hats in November 2026: Test where to place a decoration

Look for the crossings in woven fabric

Advertisementpreview

Lay out four vertical strips and three horizontal ones. Pass the first horizontal strip over one vertical strip and under the next. Start the second row underneath and then go over. Ask a second Pathfinder where the strips cross and which one they would move to add a row. This shows one kind of plain weave. Knitted fabric can use loops. Be specific about which structure you have modeled when you label the paper.

Make a set of samples another unit can use

Make a card for the raw material, a card about how parts were joined and a card that shows the crosses. Hand those cards and the paper samples to another pair. If they can identify the paper but need help seeing how it was joined, add a drawing with an arrow. Keep the three cards and the three samples together. A second unit should be able to recreate the order without having watched your first attempt.

Use the same material to make a second sample that separates the weave from the raw material. Cut eight equal strips and cross four with the other four. For sample A, go over and under at each crossing. For sample B, go over two and under two. Put both pieces under the same light and decide where the difference shows most clearly. Ask another Pathfinder pair to point to the first and third crossing and infer the sequence in sample B. They can explain how one material made two visible patterns. Tape only the ends if the strips move so that the middle stays clear for observation. On an approved scrap of cloth, you can also follow one already loose thread to see how it was held in the fabric.