What happened in Camacani?
A report published on June 11, 2026, described the fourth Camporí de Refugios, called En las Manos del Mentor. The Peruvian Lake Titicaca Mission organised the event. It brought together around 700 leaders from Adventurers, Pathfinders and Youth Ministries. The programme included seminars, outdoor activities, ceremonies and times for prayer. The paths in this article are fictional examples and do not describe routes taken at the camporee.
The National Geographic Institute of Peru defines elevation here as vertical distance from a point to mean sea level. You may see m s. n. m., a Spanish abbreviation for metres above sea level that appears in Peruvian reports. The elevation of the finish does not tell you how far the group walked or how much it climbed. You could start somewhere almost as high as the place you are going.
Mark the uphill sections on two paper profiles
An elevation profile is a side view that shows where a route goes up, goes down or stays level. Copy the four points for each path. Put points with bigger numbers higher on the paper. Put the points in order from left to right and join them. The space between points shows sequence for this exercise. It does not represent real distances.
| Made-up path | Start | Point 2 | Point 3 | Finish |
|---|---|---|---|---|
| A | 3,750 m | 3,775 m | 3,800 m | 3,805 m |
| B | 3,750 m | 3,790 m | 3,770 m | 3,805 m |
1. Find the difference between start and finish. Both routes start at 3,750 m and end at 3,805 m. For each one, the finish is 55 m higher.
2. Add the uphill sections. On A, the climbs are 25, 25 and 5 m, for 55 m of elevation gain. On B, they are 40 and 35 m, for 75 m of elevation gain. There is a descent of 20 m between them. Subtract that descent and you get back to the difference of 55 m between the endpoints.
3. Point out the descent. On B, circle the part from 3,790 to 3,770 m. Ask another pair why it does not count as a climb on the way out. One answer is, “The group went down 20 m there. It climbed again later.”
Read the profile from finish to start
Read profile B in reverse: 3,805 → 3,770 → 3,790 → 3,750 m. On the way back, the 20 m descent becomes a 20 m climb. The full out-and-back trip adds up to 95 m of elevation gain and ends at the same elevation at which it started. The difference between the start and the end of the whole trip is zero.
One pair can show another pair only the start and finish elevations. That is enough to calculate the difference between them but not the total climb. If someone decides that B is always harder, ask what they still need to know. They might mention distance, the ground surface or how steep the climbs are. This table is an exercise, not directions for a hike.
To check that everyone understands, add a stop just after 3,790 m on B at exactly the same elevation. The drawing now has a level section. The difference between the stops is 0 m, so the way out still adds up to 75 m of climbing. That is why more stops on a drawing do not mean more climbing.