Find the side you will press
Ask your instructor for a stencil with a simple, wide opening such as a circle. Fix it to the work surface. Set a piece of cardstock over it and tape one edge outside the shape. Make a pencil mark on the back of your sample to remember which side to work from. When you turn the paper over, you can see the raised shape on the side that will face the reader.
Try to find the edge of the stencil from above. If you cannot see it, adjust the light or change to a sample where you can locate the opening. A craft light box can help you find the line you need to follow. Pathfinder Wiki: tools and technique.
Make two samples with the same shape
Use two scraps of the same cardstock. On sample A, trace short parts of the line with light pressure. On B, use moderate pressure in similar strokes. Keep the same stencil and stylus. The paper and stencil need to stay in position. When both are done, remove the tape carefully and turn over the samples.
Look for a raised line you can follow around the shape. Check whether any part has creased, scratched or started to tear. If a sample tears, try a fresh scrap and use less force in each pass. Ask another Pathfinder to choose the clearer result and point to evidence. They might say that one shape stays visible around the whole curve.
Read alsoSeeds Advanced: how to set up and count a paper-towel germination testUse one practice result on your card
Record the paper, stencil and pressure you used on the sample you chose. Put the design on a flat part of the card with space around it. Work from the back and check the front before writing your message. If a small part needs more pressure, first check that the stencil still lines up. Tape on one edge can act as a hinge, letting you lift the sample and put it back down in the same place.
Make a third sample if the first two leave you unsure. Use two light passes over the same part of the shape. Keep the light, stencil, tip and paper the same. Compare it with one moderate pass. Thick cardstock and thinner paper can react differently, so practice on a scrap of the material you plan to use. Give the three scraps to a person who never saw the stencil and ask them to trace the most readable outline with a finger. Record what they report about both continuity and damage.
Further reading: Pathfinder Wiki: Card Making