The 15th Caxiuanã Forest Science Olympiad opened November 12, 2026, at Ferreira Penna Scientific Station in Melgaço, in Brazil’s Pará state. The Museu Paraense Emílio Goeldi brought together schools from Portel and Melgaço and listed a botanical art workshop with prints on recycled paper. The museum also documented an exhibition in which artists used plants to make botanical prints. In your unit exercise, you can study how an image transfers from one surface to another with a leaf shape you make from paper. Museu Goeldi, 2026 Olympiad program and Museu Goeldi, botanical printing exhibition

Make a stamp with two different sides

Advertisementpreview

Find a piece of clean cardboard and a few strips of thick paper. Glue a long strip in the middle to stand for the central vein. Add a short strip that touches the long one and sticks out to the left. Put it a little above the middle so you can find it easily. The strips are raised above the cardboard.

Mark the top edge of the cardboard with the word “top.” The cardboard carrying the raised shape is the printing block, the surface you print from. Before you add paint, hold the block in front of your partner and say where the short strip is. In your example, it reaches left a little above the center.

Turn the stamp over and check where the mark appears

With your counselor’s help, put a thin layer of washable paint on the strips. Turn the cardboard over sideways like opening the cover of a book. Keep the top edge at the top. Set the painted side on a sheet of scrap paper, press without sliding and then lift it. Give the paint time to dry.

Put the block back in its first position and look at the print beside it. If you kept the same edge at the top, the mark from the left-hand strip appears on the right. It is a mirror image. The Museum of Contemporary Art of Rio Grande do Sul describes this change in orientation in prints made from a block or plate. MACRS, printmaking definition

Read alsoFecitba 2026 in Santarém: test a paper bridge with your Pathfinder unit

Ask another pair to predict the print

Advertisementpreview

Show the block to someone who has yet to see the print. Ask them to put a counter where they expect the short mark to show up on the paper. Then reveal the print. If they expected it on the other side, repeat the turn without paint and watch the top edge together.

If the paint smudges, let the first print dry and try again with a thinner layer. Keep one block and one print with their orientation marks. Your counselor can use them to show the exercise to another unit. Each person should be able to point to a mark and tell where it appeared before and after printing.

For a second test, add a matching short strip on the right at the same height as the first. Predict what you will see on paper. When both sides match, the reflected print can look the same. Your first printing block makes the change easier to see because it has just one short strip.

Further reading: Museu Goeldi coverage

Further reading: Pathfinder clubs in Melgaço