Look for the small nut and the recessed pin

Ask an adult for two empty tubes that are already out of their wheels and have known valve types. The stem is the body of the valve that sticks out of the rim, the round part of a wheel that holds the tire. Remove the protective caps to see the tips. A Presta usually has a small nut at its tip. A Schrader, similar to a car tire valve, is wider and has a recessed pin in the middle. Park Tool gives about 6 millimeters as the normal diameter for a Presta and about 8 for a Schrader. Use a ruler as one clue alongside the tip shape. Park Tool’s valve types and pictures

Advertisementpreview

Sketch both tips at a bigger scale than the actual valves. Point one arrow toward the small nut and make another point into the opening where the pin sits. Add a blank labeled “check the type” to your card. Dunlop is another type you may encounter. If a mystery stem looks like one of your sketches at first glance, set it aside until someone can check it with a manufacturer’s diagram. Continental tube catalog with diagrams

Read alsoVHS at Goiânia’s Museum of Image and Sound: make an inventory with your Pathfinder unit

Read the markings on your own pump

The pump head is the piece that connects to the valve. Some pumps have two marked ports, while others have a head that turns to select a side. Some heads adjust automatically. Start by reading the pump markings or the instructions for the specific model. Put Presta on one line of the card and Schrader on another. For each one, record “matching port,” “confirmed adapter,” or “different pump needed.” Example of a selectable pump head from Park Tool

Advertisementpreview

Hand your drawings and card to a teammate and see whether they can pick the right port without needing you to explain which one it is. The instructor can demonstrate how the head sits on a spare tube at the table. End this first session there, with the tube empty and ready for a future maintenance practice. If the club uses a different pump next time, make a separate card using the marks on that unit. Two pumps with different connections can look similar.

Check tube size and valve type separately

Imagine you identify a Presta valve on a bike and then find a spare tube with a Presta valve. There is still a size to check. Look for the dimensions marked on the side of the bike tire. Compare them with the size range on the tube’s box. Check how far the valve will extend beyond the rim. A deeper rim can need a longer stem for a pump head to reach it. That is a different question from whether the head fits the valve. Continental on choosing tubes and valve lengths

Try a pretend packing check before your next meeting. Give one person the card for a Schrader pump and another person the card for a bike with a confirmed Presta valve. Have them decide what they need to find before putting the equipment in the box. Take the card along when your instructor shows the group how to prepare for a puncture repair.