Measure the six faces

Use an empty box 10 cm long, 6 cm wide and 4 cm high. You can draw the example on graph paper if your box has different measurements. Surface area is the total area of the outside faces. To find the area of a rectangle, multiply its two side lengths. The faces on opposite sides of a rectangular box have matching sizes. OpenStax, surface area of a rectangular solid.

Advertisementpreview
Face pairSize of one faceArea of both
Top and bottom10 × 6 cm120 cm²
Long sides10 × 4 cm80 cm²
Short ends6 × 4 cm48 cm²

The areas add up to 248 cm². Six exact pieces would cover the six faces edge to edge. A single sheet also needs paper for the seam and the folds at each end. A net is a flat drawing of the connected faces. Sketch one if you want to see which faces meet when the box is closed. Illustrative Mathematics, nets and surface area.

Turn the box to try two cuts

Keep the top of the box facing up. The ends are 10 cm apart in the first position. To go around the other four faces, count 6 + 4 + 6 + 4 = 20 cm. Add 2 cm for the overlapping seam. Set aside 4 cm for a fold at each end in the other direction. That makes 4 + 10 + 4 = 18 cm. The first trial sheet is 22 × 18 cm.

Turn the box a quarter turn on the table. Keep its top facing up. The ends are now 6 cm apart, and your new wraparound distance is 10 + 4 + 10 + 4 = 28 cm. Add 2 cm for the seam. Along the other direction, work out 4 + 6 + 4 = 14 cm. This gives a second trial sheet of 30 × 14 cm. Check the folds with scrap paper first. If your actual box has different dimensions, measure and test again.

Read alsoGeysers for Pathfinders: how to read the Old Faithful eruption forecast at Yellowstone

Match the cut to the paper you have

Advertisementpreview

Suppose you have a rectangular offcut 31 × 15 cm. The first cut uses less area, 396 cm² compared with 420 cm². Its shortest side is 18 cm. That is wider than the 15 cm side of the paper, so the first cut cannot lie along either edge of the offcut. The second cut fits. Draw the two suggested rectangles on scrap paper and test them against the 31 × 15 cm shape.

Try a second offcut, this time 28 × 20 cm. The 22 × 18 cm cut fits inside it. The 30 × 14 cm cut sticks out even if you turn it to line up with the other edge. Write down which cut worked with each scrap. A new paper shape can change which cut you choose.

Trade the box with another pair. One person checks the wraparound distance and the other checks both end folds. Ask them to show where the extra 2 cm goes and whether a leftover strip would be wide enough for a gift tag. Change one measurement and see which part of the plan moves with it.

Words in this guide

surface area · The total area of all the outside faces. In this box you add six rectangles. Back to the term