Find the part that turns and the part that moves

An automaton is a figure or device that performs a movement through a mechanism. A cam is a part that turns and can push another part. The one that follows its motion is called a follower. The Exploratorium's cardboard automata guide shows how both can attach to a simple frame. Your first test changes the place where the pivot passes through the disc. Exploratorium: Cardboard Automata.

Advertisementpreview

Compare two discs with different pivot locations

Cut two circles of the same size. Mark the centre of one and a point a little to one side of the centre on the other. Have your instructor help prepare the holes. Attach one disc at a time to an upright cardboard base with a paper fastener that lets it turn. Use the same mounting point on the base in both trials. Give each disc room to turn above the table.

Mark the height of the pivot on the background. Turn the first disc slowly and watch its top edge. When it turns about the centre, the top edge stays at about the same height. Repeat with the off-centre disc. Its top edge rises and falls during a turn. Have a partner point to the highest and lowest positions. Keep the ruler steady so the two readings use the same reference point.

Read alsoPirot kilim-making on UNESCO's 2026 agenda: read the centre and border of a textile design
Advertisementpreview

Add the idea of a follower

Imagine a thin upright strip resting on the top of the disc, with a guide to keep it in line. When the disc's edge rises, it pushes the strip up. As the edge descends, the strip can come down if it stays in contact. Draw where a figure at the end of the strip would be at the two positions. If you build a follower, have the instructor prepare the holes and check that the follower moves freely in the vertical guide. Exploratorium: setting up the cam and follower.

Add measurements if you want to check your prediction. Imagine a disc with a radius of 4 cm and an off-centre pivot 1 cm from the centre. The centred disc's top is about 4 cm above the pivot. For the second disc, its top edge moves between about 3 cm and 5 cm above the pivot in opposite positions. Check your background mark and turn again if the cardboard bends or rubs. Leave the reference in place for the next pair.

Further reading: Hachioji Yume Art Museum: World of MUTTONI · Exploratorium: Cardboard Automata