What does the Pathfinder 3D Printing honor include?

The practical projects include printing a file you choose and making a file to reproduce an object from home. The full honor also asks you to research a current use for the technology and complete activities connecting the skill with faith or service. An existing tabletop sign holder is a simple object to measure and reproduce. If you are working on the honor, ask your instructor to confirm the item you will model and which requirements your club follows. Pathfinder Wiki, projects and spiritual applications

Advertisementpreview

Measure the holder and make two cardboard slots

Measure the length and width of the holder’s base, the height of its sides and the thickness of the sign. If you only have a ruler marked in whole millimeters, stack three equal pieces of the sign material and divide the stack’s thickness by three. With a counselor’s help, you can also use calipers, a measuring tool with two jaws that can close gently around an object or measure the inside of a slot.

Use firm cardboard to make two bases. For each base, tape down two strips of cardboard as the sides of the slot. Try leaving 4 mm between the strips on one base and 5 mm on the other. With a 3 mm sign that leaves 1 mm and 2 mm of total clearance, the difference between the slot width and the sign thickness. Put the same sign into each slot three times. Check if it goes in easily, stands upright and comes out without lifting the base. Note any cardboard bends or tape movement before comparing the two results.

Read alsoCeramics in Brazil’s Espírito Santo: learn about the Goiabeiras potters and try hand modeling

Use your measurements to model and print a small sample

Advertisementpreview

Computer-aided design, or CAD, lets you draw the holder as a digital model made of simple shapes. Start with one flat block for the base and two narrow blocks for the sides. Keep the sizes of the base and sides the same when comparing slot widths. With your instructor, make a short test sample of each slot before printing a whole holder. Wait for the completed piece to cool as the lab directs. Use the same sign to see how the printed slots fit. A printed wall may be stiffer than cardboard, so use your test of the printed sample to choose the next adjustment.

A 3D printer builds an object layer by layer. A filament printer feeds material through a heated part and deposits it in thin layers. Use the equipment with the person responsible for the lab. The US National Institute for Occupational Safety and Health covers ventilation, hot parts and other risks in its guidance for libraries and schools. In Washington, DC, the Fabrication Lab at the Martin Luther King Jr. Memorial Library lists a 3D Printing Intro before people can reserve printer time. The Labs requires parent or guardian consent for minors, and the adult takes part alongside children through age 12. Check course availability and the other participation rules before booking. NIOSH, safe 3D printing in schools and libraries · DC Public Library, Fabrication Lab · The Labs, participation rules

Let another Pathfinder repeat your fit test

Show another pair your original holder, the two widths and the observations you wrote down. If the 5 mm slot lets the sign slide in but it leans too far, ask the other pair to check that result. Agree which width to try next. Use the same approach when your club needs a holder for a room sign or a table label. Ask the person who will use it to try inserting and removing the sign. Add that feedback to your design notes along with the measurements and a photo of the tested object.

Further reading: Pathfinder Wiki, requirements