A cistern is a water storage tank. Sketch a roof, a gutter and the tank. Before you test the model, mark where you think some of the water might escape.

Roof area matters in the sertão, an inland semiarid region of Pernambuco, Brazil. In March 2026, Brazil's National Health Foundation visited rural communities in Granito, Serrita and Cedro ahead of planned installations of 16,000-liter cisterns. The available roof area at each home was among the details the team checked. Brazil's National Health Foundation, Pernambuco site visits

Follow the water from roof to tank

Advertisementpreview

In a roof catchment system, rain lands on the roof and gutters carry water toward a cistern. How much reaches it depends on rainfall, the contributing roof area and how efficiently the system collects water. Ask the club to sketch a roof as seen from above. If the two sides drain separately and only one connects to the tank, count the horizontal area served by that gutter. Cistern technical guide, Embrapa repository

Track three quantities on the board. How much fell on the roof? How much reached the tank? How much space was left to store it? Each question has a different answer once you account for losses and tank capacity.

Calculate the catchment from a 30-square-meter roof

Start with a 30 m² horizontal collection area and 20 mm of rain. Divide the club into two groups. Use 80% efficiency for one and 60% for the other. These figures are assumptions for the exercise.

StepCalculationResult
Rain falling on the roof area30 m² × 20 mm × 1 L per m² per mm600 L
Tank inflow at 80% efficiency600 L × 0.80480 L
Tank inflow at 60% efficiency600 L × 0.60360 L
Space left in a 500 L practice tank holding 80 L500 L − 80 L420 L
Overflow in the 80% case480 L − 420 L60 L

At 80% efficiency, 480 L reaches the tank and 420 L fits. The tank ends up full and 60 L overflows. Ask the second team to explain what happens at 60% efficiency. Its tank holds 440 L at the end, with space for 60 L more.

Read alsoMarch equinox 2027 in Macapá: measure a shadow at the equator

Build a tabletop model of the catchment

Use a rigid tray for the roof, a short gutter, a measuring cup and a larger basin to catch splashes. Set them up on a sturdy table that can get wet. Measure 300 mL to simulate a rain event. Pour it slowly over the tray and measure how much arrives at the outlet.

Advertisementpreview

Repeat with the same 300 mL and change just one part, such as the gutter's alignment. Empty the receiving cup between runs. Have the group point out where water escaped and divide the amount collected by the 300 mL poured to find the fraction that reached the outlet. Keep the model water for the experiment.

Compare two storms separated by dry days

Give each team four cards, two for rainy days and two for dry days. Have teams calculate the tank level at the end of each day. Then keep the total rainfall the same and change the order of the days and when water is drawn from the tank. If the first storm fills the tank, some of the second storm can overflow even when the total rainfall is unchanged.

Finish by asking each team for one observation from the model and one measurement they would need for a real system. Rainfall patterns, catchment area and the rate of water use help explain why the number printed on the tank tells only part of the story. Embrapa, harvesting and using rainwater in cisterns

For a local look at the movement where the foundation conducted its visits, see the Pathfinder directory for Serrita.

Further reading: Technical study by Embrapa

Further reading: Embrapa, catchment, storage and water quality