When is Santurantikuy 2026?
Cusco’s municipal events organiser, EMUFEC, lists the fair for December 22–24, 2026, in Cusco’s Plaza de Armas, in its regulations for the edition. Its background page highlights December 24 as a traditional date and the Niño Manuelito, a depiction of the infant Jesus, as a central figure. The fair also includes small animals and other objects that go into Cusco’s Nativity scenes. Check the organiser’s current programme if you are planning a family visit.
A small sculpture can have a base to stand on. A catalogue from the Museo Histórico Regional de Cusco describes a work with two seated child figures on a rectangular wooden base. That describes a piece documented by the museum. For the club test, invent your own cardboard animal or tree and give it a flat base. The shape can stay simple so everyone can see when the model begins to tip.
Read alsoPalmas school arts festival 2026: photograph a drawing without skewed edgesTest a narrow and a wide base
Get cardboard, tape, a little modelling clay, and a tray or the lid of a cardboard box. Work over a table where the light pieces can fall into the tray. Make two matching figures and two matching rectangular bases, for example 4 by 8 centimetres. Mark them A and B. Tape the figures to the centres of the bases. Put the same amount of clay at the same height on both figures, with half on each side to keep the mass centred.
1. Draw an arrow on the tray to show which way it will tilt. Stand the figures side by side. Line up the 4-centimetre side of base A with the arrow. Rotate base B so its 8-centimetre side runs parallel to the arrow. The support now has a different width in the direction of the tilt, with the same amount of cardboard.
2. Slowly raise one edge of the tray. Ask a teammate to say which figure tips first. If a figure slides, record that and repeat with a piece of rough paper taped to the tray.
3. Lower the tray and swap the positions of the figures. Raise the same edge again. If your observation changes, check whether the tray twisted or some tape came loose.
4. Record which figure tipped first each time. Show how the figures faced before comparing notes with another pair.
The centre of mass is a point that represents how mass is spread around an object. Imagine a line going straight down from that point. The figure can stay upright while the line falls within its area of support. If the tilt takes the line beyond that area, the figure tends to tip. A base that is wider in the direction of the tilt gives the line more room.
Move the clay and keep the base the same
Turn both bases so the same side runs parallel to the arrow. Keep the same amount of clay centred. Place it near the top of one figure and near the bottom of the other. Raise the tray edge again. The figure whose clay is lower tends to stay upright at a steeper angle. Record the result on your table. If they fall together, record the tie and suggest a new test with a greater distance between the clay positions.
Write two lines for the unit. The first says what you changed. The second says what you saw. You might write “The figures had the same height and we changed the base width. The narrower base tipped first in two trials.” Put the note by the models so another pair can test your explanation.