What the students did in Bolivia

On September 29, 2026, South American Adventist News reported on a week of service by students from Colegio Adventista del Ecuador through the Generación Servicio project. At Rosas Seventh-day Adventist Church in Bolivia, they helped improve spaces through painting and other work and took part in community activities. The report does not list wall sizes or paint quantities. The model below gives your club its own numbers to try.

Advertisementpreview

Sketch a wall with two openings

Area measures how much space a surface covers. A square meter, written m², is the area inside a square that is one meter wide and one meter tall. Multiply the width of a rectangle by its height to find its area. Use the same unit for both measurements. For example, 80 centimeters is 0.8 meters.

Draw a wall that is 4 m wide and 2.5 m tall. Add a 0.8 m by 2 m door and a 1.2 m by 1 m window. Shade the part of the wall you would paint and leave both openings empty. Work through the numbers:

1. Whole wall: 4 × 2.5 = 10 m².
2. Door: 0.8 × 2 = 1.6 m².
3. Window: 1.2 × 1 = 1.2 m².
4. Paintable wall: 10 − 1.6 − 1.2 = 7.2 m².

Write a label beside each result. A list of numbers makes sense to the person who wrote it, but somebody else needs to know which opening each number belongs to.

Read alsoCommunity service hours: how to plan and record them
Advertisementpreview

Work out an estimate with a practice label

A coat is one layer across the whole surface. If the wall needs two coats, multiply 7.2 by 2 to get 14.4 m² of coverage. This number counts the same surface twice. Now use a pretend label that says one liter covers 8 m² for one coat. Divide 14.4 by 8 to get 1.8 liters for the practice wall.

The figure is an estimate, a number based on the details you have. The Sherwin-Williams painting guide explains the same division and points out that the texture of a wall can affect how much paint you need. For a real project, an adult would check whether the label gives coverage for one coat or the finished result and confirm the size and condition of the wall.

Give your sketch and note to someone from another unit. Ask them to find both 7.2 m² and 1.8 liters and say what each one describes. If they mix up the numbers, put “wall area” and “sample paint estimate” on separate lines. Add one question you would ask the person who looks after the building, such as “Is this the only wall you want to include?”

For a second challenge, make the wall 3 m wide and 2 m tall. Keep the same door and leave out the window. Before you calculate, guess whether one coat would take more or less than a liter with the same practice label. You should find 4.4 m² and 0.55 liters. That first guess gives you a way to catch an error if the calculator shows a much bigger number.