The photo exhibition À Beira explores rivers, people and the passage of time. The city announced 30 works by Bruno Spadoni, Marcus Mesquita and Flávio André, with free admission from November 7 to December 30, 2026. The museum is on Rua Comandante Costa in the Centro Sul district. In an update after the opening, the city reported daily hours from 8 a.m. to 5 p.m. and a quick QR code check-in at the entrance. Check the current hours before organizing a group visit. Exhibition announcement and city report on museum access.
Why the museum is underground
The structure was built in 1882. It received water drawn from the Cuiabá River and was part of the first public water supply system in the capital of Mato Grosso state. The underground reservoir now houses exhibitions. The city also lists surviving iron pipes and valves used to control water flow among the museum’s historical objects. A clear hose lets your unit see what happens in one small, simple example of connected pipes. The water rests inside the hose, and air touches the surface on both sides. City of Cuiabá account of the museum’s history
Read alsoScience in Quito: explore backpack strap pressure with your Pathfinder unitMark the water levels in a hose
Find about a meter of clear plastic hose, adhesive tape, water, paper, a pencil and a tray. Build the model with an adult. Put a sheet of paper upright behind the tray. Bend the hose into a U with both open ends pointing up, then use the tape to hold it gently in place. Pour in water slowly until you can see it in both sides, well below the open ends. Check that the water is continuous through the bend. A large air bubble can break that connection.
• Wait for the water to settle. Put a pencil mark on the paper next to the water surface in each arm.
• Raise the right end a few centimeters. Keep both ends open, with no kinks and both water surfaces visible.
• Wait again and make a new pair of marks. Join the pair for each round. If the paper is truly upright and the tray sits on a level table, the lines between the marks should be close to horizontal.
Read the marks your unit made
Scientists call the two sides of the hose communicating vessels. That means they contain the same liquid and are connected so it can move from one side to the other. The air pushes equally on the two exposed surfaces. Once the water settles, those surfaces are at the same height. The empty length from the water to the open end can differ on each side. The University of São Paulo’s physics institute explains how this same principle lets builders line up height marks using a water-filled hose. Water level demonstration from the University of São Paulo
Draw your final setup with one opening clearly above the other. Pass the sketch to someone else, and ask them to join the water surfaces with a dotted line. Keep it for the next meeting. If the line you measured first looks tilted, check that the paper is upright and wait for any small waves to disappear before making new marks.