Name the moving part, the fixed part, and the point of support

The door leaf is the moving panel. The frame stays fixed around the opening. A pivot is a point of support that allows the door to turn, for example around an imaginary line between its top and bottom supports. That line is the axis. Open the museum's Doors on Pivots gallery and compare the front and back of a piece. Point to the edge of the leaf. Then say which part you would need to see more clearly to locate the support. Qatar Museums: Doors on Pivots.

Advertisementpreview

If you can see the leaf but the frame is outside the picture, write that in your sketch. Use the museum's identified examples to notice parts of a door. The model below uses its own sizes to show a movement you can test at a table.

Read alsoEnedina Alves Marques in Curitiba: follow the path of water in a model

Make two top-view models

Get card, a ruler, a pencil and a split fastener. Ask an adult to make the holes for the fastener. Draw a 10-centimeter doorway from above and cut a narrow strip of card of the same length to show the leaf. Mark where the handle would go. Attach the leaf to the fixed plan with the fastener so you can move it around one point.

Advertisementpreview

Place the pivot near one end of the first leaf. Mark the closed position, then mark where the leaf finishes after a quarter turn. Trace the path of its far end. For the second model, keep the same length and put the pivot two centimeters in from the end. Try the same turn and trace both ends. The shorter side swings to the other side of the doorway from the longer side. This tabletop exercise gives you a way to test a design decision before working with wood. Pathfinder Wiki: Wood Handicraft answer key.

Work out how much room the door needs

Draw a small pot on a separate piece of card. Place it near the doorway, where the short end might turn. Try both designs with the pot in the same place. If the leaf hits the pot card, point to where the collision happens. Mark the area that stays clear and use an arrow to show where a person could walk through the doorway.

Hand your second diagram to a Pathfinder who did not see the test. Ask them to find the pivot and show which part of the leaf crosses behind it. If they can repeat the test from your sketch, the diagram explains the movement.