The idea comes from Quito, Ecuador. Its city programme, published on November 13, 2026, listed Burbujas: La ciencia de hacer ¡plop! for November 14 at Yaku Parque Museo del Agua, with sessions at 11:30 a.m. and 2:30 p.m. The workshop set out to explore bubbles through water, soap, air, and light. The activity below is from Desbravai and can be done separately at a club meeting.
Why does light come back in different colours?
The thin skin of a bubble is a film. It has two surfaces: one faces out and the other faces the air inside. Some light bounces back from the first surface. Some enters the film and reflects off the second surface before coming back out. The light takes two slightly different paths before reaching your eyes.
When the reflected light comes together, some colours may show more strongly and others less strongly. That is an example of interference. The Exploratorium explains how the colours can change as the film gets thinner or thicker. Light and viewing angle also affect what you see. Your demonstration checks for a change over time. It does not use colour to work out the film’s thickness.
Compare the soap film with a drawn stripe
Get a toy bubble wand and solution, a tray, some dark paper, and a sheet with a stripe drawn on it. Put the dark background behind the wand so it is easier to see the reflected light. Use a well-lit room and keep the same lighting and background for the whole comparison.
1. Choose a spot. Dip the wand and lift it over the tray. A film can form across the ring without you blowing a bubble. Hold the wand facing you and pick a spot near the top of the opening. Put the striped paper beside the wand.
2. Look again. Write down or draw what you can see at the chosen spot. About five seconds later, look at the same spot from the same angle. If the film pops first, write that down. You can try again without guessing which colours would have appeared.
3. Check the paper. See whether both stripes looked the same after those seconds. If the film changed and the paper did not, describe what you noticed. If you never saw a clear stripe on the film, include that in your notes.
Write a note another unit could repeat
Here is a pretend record: “I saw a blue band near the top at first. Later I could not see it at the same spot. The stripe on the paper stayed blue.” It reports one attempt rather than a pattern every group should expect. If you have trouble finding the spot a second time, mark the height on one edge of the background. Save your notes with a sketch showing where you stood and where you held the wand. That lets another group try the observation again.
If you cannot name a colour, describe the brightness or location. “The brighter part moved up” and “the brighter part got narrower” describe different changes you can sketch. One person can say what they saw while another makes the marks. Write “no change” only if you managed to observe both times.
Words in this guide
film · Here, the thin soapy layer between the air inside a bubble and the air around it. Back to the term
interference · A change when waves meet. In a bubble, it can make some colours stronger and others weaker. Back to the term